C&H Technology, Inc. - Item # PAC 00...06 Series, Axial Leaded - Precision 
Search Catalog
      GO   
 All Categories    Resistors, Fixed Discrete - Wirewound
Use wildcard symbol (*) for partial Keyword searches
View RFQ's  | Shipping 
 | Tax 
 | Terms 
 Request for Quote  0 items 
All Categories > Industrial Power Resistors > Resistors, Fixed Discrete - Thick Film  > Resistors, Fixed Discrete - Wirewound > Item # PAC 00...06 Series  
    Print Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # PAC 00...06 Series, Axial Leaded - Precision
QUOTE


    Email Email This Page  
    Save To Favorites Save To Favorites
  

Resistor Wirewound

larger image
Cemented Wirewound Precision Resistors

Features
  • High power dissipation in small volume
  • Ideal for pulse application
  • TCR ± 100 ppm/K
  • Maximum permissible hot spot temperature is 275 °C
  • Lead (Pb)-free
  • Tolerance 1 %

    The resistor element is a resistive wire which is wound in a single layer on a ceramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the leads are connected to the caps by welding. Tinned copper-clad iron leads with poor heat conductivity are employed permitting the use of relatively short leads to obtain stable mounting without overheating the solder joint.

    The resistor is coated with a green silicon cement which is not resistant to aggressive fluxes. The coating is non-inflammable, will not drip even at high overloads and is resistant to most commonly used cleaning solvents, in accordance with “MIL-STD-202E, method 215” and “IEC 60068-2-45”.


    •  Specifications  

    Technology

    		Wirewound

    Typical TCR

    		100 ppm/C

    Power Range

    		1 to 6 W

    Std. Tolerance

    		1.0 %

    Min. Resistance

    		0.68 Ohm

    Max. Resistance

    		10 to 12 Ohm

    Resistance Range

    		0.1 to 12K Ohm

     DOWNLOADS 

    width= PAC-01-06
    (PDF, 85KB)

    Request Information